Ranger 4WD V6-3.0L (2008)
6. Position the driveshaft and align the marks on the pinion flange.
7. NOTE: The driveshaft centering socket yoke fits tightly on the rear axle pinion flange pilot. To make sure that the yoke seats squarely on the
flange, tighten the bolts evenly in a cross pattern.
Install the 4 driveshaft bolts.
^
Tighten to 112 Nm (83 lb-ft).
8. Install the rear brake drums.
Ford 8.8-Inch Ring Gear - Rear Drive Axle/Differential
Drive Pinion Flange
