Ranger 4WD V6-3.0L (2008)
Universal Joint: Service and Repair
Driveshaft Universal Joint - Single Cardan, Slip Yoke
Driveshaft Universal Joint - Single Cardan, Slip Yoke
Universal Joint
Disassembly
Initial Disassembly
1. CAUTION: Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing
fracture may result, causing shaft failure during vehicle operation.
Place the shaft on a suitable workbench. Do not damage the tube.
2. Remove and discard the 2 snap rings.