Ranger 4WD V6-3.0L (2008)
Shift Indicator: Adjustments
Selector Lever Indicator Adjustment
1. Remove the upper instrument panel steering column cover.
2. Place the selector lever in the (D) position.
^
Rotate the selector lever clockwise until it bottoms out (1st gear), then rotate 2 detents counterclockwise ((D) position).
3. Hang the 1.4 kg (3 lb) weight on the gearshift lever.
4. Center the pointer in the middle of the (D) position.
^
Rotate the thumb-wheel located on the bottom of the steering column to adjust the pointer.
5. Remove the 1.4 kg (3 lb) weight.
6. Carefully move the selector lever into each detent and compare with the transmission settings.
^
Readjust if necessary.
7. Install the upper instrument panel steering column cover.
