Ranger 4WD V6-3.0L VIN U (1997)
26. Install engine front cover including oil pan crankshaft vibration damper and front accessory components.
27. Position the air conditioning hose and manifold assembly in engine compartment with hoses as originally routed with no kinks or binds.
28. Remove all caps and plugs. Push suction hose into coupling on accumulator and liquid line into coupling on condenser.
29. Position hose assembly manifold to A/C compressor and install retaining bolt. Tighten to 25-30 Nm (18-22 ft. lbs.).
30. Evacuate and recharge air conditioning system.
31. Install valve covers.
32. Install fuel injector electrical harness to each injector. Secure with standoffs to inboard rocker arm cover studs.
33. Install throttle body.
34. Install ignition coil and bracket assembly (Ranger only). Tighten retaining nuts to 16-20 Nm (12-15 ft. lbs.).
