Ranger 4WD V6-3.0L VIN U (1997)
Drive Belt: Specifications
DRIVE BELT TENSION
New Belt Installation Tension ................................................................................................................................................................... (a) 150-190 lbs.
Used Belts Reset Tension ......................................................................................................................................................................... (b) 140-160 lbs.
Allowable Minimum Cold Belt Audit Check ................................................................................................................................................ (b)(c) 90 lbs.
(a) New belt installed and tensioned; engine not rotated
(b) Used belt is any belt that has rotated on an engine.
(c) Cold belt (i.e., 3-hour soak; 0 warm-up)
