Ranger 4WD V6-3.0L VIN U (1997)
9. Lower vehicle.
10. Install lifting device and support engine. Remove wood blocks and lower engine back into original position. Remove lifting device and Rotunda
Engine Lifting Sling 014-00036 (or equivalent). Remove lifting brackets from right and left exhaust manifolds.
11. Remove support straps, lower radiator into position, and install radiator bolts to core support. Position fan shroud and install the retaining bolts.
Tighten bolts to 6-8 N-m (52-71 lb-in).
12. Install engine mount nuts and tighten to 98-132 N-m (72-97 lb-ft).
13. Connect 42-pin connector to the bracket and install oil level indicator.
14. Install engine air cleaner outlet tube assembly. Connect IAT sensor, MAF sensor, and crankcase ventilation hose. Securely tighten the hose clamp.
Note:
When battery has been disconnected and reconnected, some abnormal drive symptoms can occur while powertrain control module (PCM)
relearns its adaptive strategy. Vehicle may need to be driven 16 km (10 miles) or more to relearn strategy.
15. Connect battery ground cable.
16. Fill crankcase with correct viscosity and amount of engine oil.
17. Start engine and check for oil leaks.
