Ranger 4WD V6-3.0L VIN U (1997)
REMOVAL
1. Remove instrument panel.
2. Remove four screws at the top of the defroster, front of instrument panel pad.
3. Remove two screws attaching defroster to the instrument panel duct beam.
4. Disconnect demister hoses from defroster (pull off).
5. Remove nozzle assembly.
INSTALLATION
1. To install, follow installation steps in reverse order.
Defroster Grille
REMOVAL
1. Lift edge of defroster grille using a flat edge dowel.
2. Grab defroster grille edge and lift up to release clips and tension tabs.
INSTALLATION
For installation, follow removal procedure in reverse order.
