Ranger 4WD V6-3.0L VIN U (1997)
3.
Remove evaporator core as outlined in the appropriate Workshop Manual. Adjust evaporator core seal position to seal any gaps that will allow air
flow past any section of the core other than the fin area. Refer to Figures 1-5, as a guide. On Explorer/Mountaineer and Ranger vehicles, replace
the -19D578- evaporator seal with a new Evaporator Seal (XL2Z-19A672-AA) (Figure 5) to provide necessary sealing.
4.
Reinstall evaporator core.
5.
Verify repair.
PART NUMBER
PART NAME
F5TZ-19A672-A
Evaporator Seal
XL2Z-19A672-AA
Evaporator Seal
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 98-16-15
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
982308A
Reseal Evaporator Core -
2.2 Hrs.
Super Duty
982308B
Reseal Evaporator Core - 2.1 Hrs.
Ranger,
Explorer/Mountaineer
DEALER CODING
CONDITION
BASIC PART NO.
CODE
19850
68
OASIS CODES: 110000, 208000, 208999