Ranger 4WD V6-3.0L VIN U (1997)
Circuit Breaker: Service and Repair
To check or replace a fuse, relay or circuit breaker:
1. Locate and remove the suspect fuse, relay or circuit breaker by pulling it out of its cavity (no special tools required).
2. Replace fuse, relay or circuit breaker with one of the proper amperage rating for the circuit by pushing straight in until fuse, relay or circuit breaker
seats itself fully in cavity.
CAUTION: Never install a replacement fuse, relay or circuit breaker with a higher or lower amperage rating than indicated for a circuit.
