Ranger 4WD V6-3.0L VIN U (1997)
EGR Valve: Service and Repair
REMOVAL
1. Disconnect the vacuum hose from the EGR valve.
2. Disconnect the EGR valve to exhaust manifold tube from the EGR valve.
3. Remove the EGR valve bolts and the EGR valve.
4. Remove the EGR valve gasket and clean gasket sealing surface.
INSTALLATION
1. Position EGR valve with a new EGR valve gasket and install EGR valve bolts. Tighten to 20-30 N.m (15-22 lb ft)
2. Connect the EGR valve to exhaust manifold tube to the EGR valve. Tighten the EGR valve to exhaust manifold tube bolt to 20-30 N.m (15-22 lb
ft).
3. Connect the vacuum hose to the EGR valve.