Ford Workshop Service and Repair Manuals > Ranger 4WD V6-3.0L VIN U (1997) > Powertrain Management | Transmission Control Systems | Actuators and Solenoids - Transmission and Drivetrain | Actuators and Solenoids - A/T | Shift Solenoid, A/T | Component Information | Service and Repair | Disassembly

Page 4

3. Carefully install the TSS connector into the 16-pin case connector.

NOTE: Align the slot on the TSS connector with the slot on the 16-pin case connector.

4. Install the case connector retaining spring.

CAUTION: Do not overstretch the retaining spring.

5. Install SS2 and EPC solenoids.

Ford Workshop Service and Repair Manuals