Ranger 4WD V6-3.0L VIN U (1997)
Height Adjuster
On Ranger Regular Cab: Adjust the shoulder belt up or down until the shoulder belt rests across the middle of your shoulder. To adjust, push the
release button and slide the adjuster down. Then release the button. Make sure the adjuster is firmly in one of the four (4) positions. Pull up on the
shoulder portion of the safety belt to tighten the lap portion to a snug fit. Make sure the safety belt is as low on the hips as possible.
2. To tighten the lap portion of the belt, pull up on the shoulder belt until it fits snugly. The belt should rest as low on the hips as possible.
3. The safety belt system allows freedom of movement, locking only on hard braking or impacts of approximately 8 km/h (5 mph) or more. The front
seat retractors can be made to lock by jerking on the safety belt.
NOTE: The shoulder restraint portion of the safety belt adjusts automatically to a snug position.
NOTE: The rear retractors cannot be made to lock up when jerking on the shoulder belt.
