Ranger 4WD V6-3.0L VIN U (1997)
Part 2 Of 2
The C-II power steering pump is a drive belt, slipper-type pump with a fiberglass-reinforced nylon power steering fluid reservoir. The power steering
fluid reservoir is attached to the rear side of the pump housing front plate and the power steering pump housing is encased within the housing and
reservoir. The power steering pressure hose is attached with a quick connect fitting, located below the filler neck at the outboard side of the power
steering fluid reservoir. The fitting allows the line to swivel. This is normal and does not indicate an untorqued fitting.