Ranger 4WD V6-3.0L VIN U (1997)
Wheel Hub (Locking): Service and Repair
REMOVAL
1. Raise the vehicle and install Rotunda Car/Truck Stands 077-00018 or equivalent.
2. Remove lug nuts and the wheel and tire assembly.
3. Remove lugnut retainer washer from studs.
4. Remove the manual locking hub assembly.
5. Slide internal hub lock assembly, spring and clutch gear out of hub body.
CAUTION: Do not remove the screw from the plastic dial.
INSTALLATION
For installation, follow removal procedures in reverse order. Tighten lugnuts to 135 Nm (100 ft. lbs.).
