Ranger 4WD V6-3.0L VIN U (1997)
CAUTION: The shift and coast clutch solenoid terminals must face upward.
NOTE:
^
The shift and CCS solenoids are interchangeable.
^
If the TCC valve came out, use caution when installing the TCC solenoid.
14. Install the solenoid clamp. Tighten the solenoid clamp screw to 6-8 Nm (53-71 inch lbs.).
CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
15. Install shift solenoids 1 and 3.
16. Install the solenoid clamp. Tighten the clamp screw to 6-8 Nm (53-71 inch lbs.).