Ranger 4WD V6-3.0L VIN U (1997)
INSTALLATION
1. Install the TCC, CCS, SS2, EPC solenoids, solenoid bracket and screws. Tighten to 6-8 Nm.
CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
2. Install the SS1 and SS3 solenoids, solenoid bracket and screws. Tighten to 6-8 Nm (53-71 inch lbs.).
3. Carefully press down to install the solenoid connectors on the solenoids as shown.
