Ranger 4WD V6-3.0L VIN U (1997)
11. Inspect the friction clutch plates, steel clutch plates and clutch pressure plate for worn or scored bearing surface. Replace all parts that are deeply
scored.
12. Check clutch plates for flatness and fit on the clutch hub serrations. Discard any plate that does not slide freely on the serrations or that is not flat.
13. Check clutch hub thrust surfaces for scores and clutch hub splines for wear.
14. Make sure the check ball is free and clear of debris prior to installing the forward clutch piston.
NOTE: The check ball is located in the piston.
15. Inspect bearing and seal rings for damage.
ASSEMBLY
1. Install new forward clutch piston inner and outer seals on the forward clutch piston. Install the forward clutch cushion spring.
CAUTION: If there is evidence of clutch plate burning, replace the forward clutch cushion spring.
