Ranger 4WD V6-3.0L VIN U (1997)
2. To prevent damage to the forward clutch piston outer seal, install Lip Seal Protector T74P-77548-B. To prevent damage to the forward clutch
piston inner seal install Lip Seal Protector T74P-77548-A into forward clutch cylinder.
3. Carefully install the forward clutch piston into the forward clutch cylinder.
CAUTION: Care must be taken to prevent damage to the seals.
NOTE: Apply petroleum jelly to the inner and outer seals.
4. Carefully remove Lip Seal Protector T74P-77548-A and Lip Seal Protector T74P-77548-B from the forward clutch cylinder.
5. Install the 15 forward clutch piston springs and forward clutch piston spring retainer.
6. Compress the clutch piston springs with Clutch Spring Compressor T65L-77515-A and install the retaining ring. Release the load on the forward
clutch piston springs and remove the tool.
CAUTION: Do not fully compress the clutch spring compressor or damage to the forward clutch piston spring retainer may occur.
