Ranger 4WD V6-3.0L VIN U (1997)
7. Install the steel clutch plates and friction clutch plates in alternating order, starting with a steel plate and finishing with a friction plate.
CAUTION:
^
Friction plates are directional and must be installed with grooves counterclockwise (I.D. to O.D.). The word "TOP" should face up.
^
If new plates are being used, they should be soaked in clean transmission fluid for at least 30 minutes before assembly.
NOTE: When installing friction plates, the word "TOP" should face up. If reusing plates, grooves must be installed counterclockwise.
8. Install the forward clutch pressure plate on the clutch pack. Install the original retaining ring.
CAUTION: The retaining ring is a select fit.
