Ranger 4WD V6-3.0L VIN U (1997)
6. Install one Me x 55mm fluid filter assembly-to-main control assembly screw using a 10mm socket as shown. Tighten to 8-11 Nm (71-97 inch
lbs.).
CAUTION: Make sure wire harness is not pinched under filter.
7. Install fluid pan and gasket onto transmission and install eighteen M8 x 16 mm fluid pan-to-case screws. Tighten to 13-15 Nm (115-133 inch lbs.)
using a crisscross sequence.
8. Fill the transmission to the proper level.