Ranger 4WD V6-30L VIN U (1997) | Automatic Transmission Parking Pawl Repair
Parking Pawl: Service and Repair
REMOVAL
1. Remove fluid pan. Remove fluid filter.
2. Remove EPC, SS2 and CCS solenoids. Remove case connector.
3. Remove the manual valve inner lever nut.
CAUTION: To avoid damage, make sure the wrench does not strike the manual valve inner lever pin.
4. Remove the manual valve inner lever and parking pawl actuating rod assembly.
5. Remove extension housing.
6. Inspect park pawl spring and shaft. Inspect park pawl actuating rod. Service as required.