Ranger 4WD V6-3.0L VIN U (1997)
7. Remove all excess grease from the driveshaft slip-yoke boot and driveshaft slip-yoke. Position the driveshaft slip-yoke boot over the groove.
8. Move the driveshaft slip-yoke in or out in order to position the slip-yoke about 25-38 mm (1-1.5 inches) from the collapsed position.
9. Using Keystone Clamp Pliers T63P-9171-A, crimp the large driveshaft slip-yoke boot clamp.
10. Reinstall driveshaft.
