Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Power Door Lock Actuator: Service and Repair
Latch-Door
Special Tools
Removal
1. Position the window glass in the full up position.
2. Disconnect the battery ground cable.
4. Remove the watershield.
5. Remove the door glass rear run channel.
-
Remove the bolt.
-
Remove the window glass rear run channel.
6. Disconnect the front door latch control cylinder rod from the door lock cylinder lever.
7. Remove the outside door handle actuating rod.
1. Unclip the outside door handle actuating rod.
2. Remove the outside door handle actuating rod.
8. If equipped, drill out the power door lock actuator rivet.
