Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
9. Remove the front door latch screws
10. Disconnect the interior lamp switch and the door ajar switch electrical connectors.
-
If equipped, disconnect the power door lock actuator electrical connector.
11. Position the door latch assembly aside.
12. Remove the front door latch cable watershield.
13. Remove the front door latch cable.
1. Remove the cable conduit from the door latch.
2. Disconnect cable from the door latch.
14. Remove the door latch push button rod.
15.
If equipped, disconnect the power door lock actuator from the door latch assembly.
Installation
1. NOTE: Check window operation after installation. To install, reverse the removal procedure.