Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
7. Using a Crankshaft Vibration Damper Remover, remove the crankshaft damper.
8. Remove the crankshaft key, if required.
Installation
1. If removed, install the crankshaft key.
2. Using a Crankshaft Vibration Damper and Seal Replacer, install the crankshaft damper.
-
Coat the sealing surfaces of the crankshaft damper with the clean engine oil SAE 5W30 Motor Oil XO-5W30-QSP or equivalent meeting Ford
specification WSS-M2C153-G.
-
Coat the crankshaft damper keyway with Silicone Gasket and Sealant F6AZ- 19562-A or equivalent meeting Ford specification
WSE-M4G323-A6.
-
Install the crankshaft damper.
