Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
13. Connect the engine control sensor wiring to the crankshaft position sensor, the engine coolant temperature sensor, the water temperature indicator
sender unit, the fuel injectors and the camshaft synchronizer.
14. Install the ignition coil and the plug wires as an assembly.
15. Connect the engine control sensor wiring to the radio ignition interference capacitor, the ignition coil and the EGR solenoid.
16. Install both valve covers.
17. Connect the battery ground cable.
18. Fill and bleed the engine cooling system.
