Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Intake Manifold: Service and Repair
Upper Intake Manifold
Removal
1. Disconnect the battery ground cable.
2. Remove the air cleaner outlet tube.
3. Disconnect the accelerator cable and the speed control actuator cable.
4. Disconnect the engine control sensor wiring from the Throttle Position (TP) sensor, the Idle Air Control (IAC) valve and the EGR transducer.
5. Remove the two bolts.
6. Disconnect the vacuum tube.
7. Disconnect the EGR solenoid vacuum tube.
