Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Installation
1. Position the exhaust manifold gasket and the exhaust manifold.
2. Install the bolts and the nuts.
-
Tighten the sequence shown in two steps:
1
Tighten to 10 Nm (8 ft. lbs.).
2
Tighten to 20 - 25 Nm (15 - 18 ft. lbs.).
3. Install the ignition coil bracket.
4. Raise the vehicle on a hoist.
5. Install the nuts.
6. Install the LH heated oxygen sensor.
7. Lower the vehicle.
8. Connect the battery ground cable.
