Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
1. Thread an 8 x 1.25 mm bolt into the A/C clutch to force it from the compressor shaft.
2. Lift the A/C clutch and the A/C clutch hub spacer from the compressor shaft.
4. Remove the pulley snap ring.
5. Remove the A/C clutch pulley.
6. Remove the A/C clutch field coil.
1. Note the location of the A/C clutch field coil electrical connector.
2. Install the Shaft Protector for Coil Removal on the nose opening of the A/C compressor.
3. Install the Differential Side Bearing Puller.
4. Remove the A/C clutch field coil.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
INSTALLATION
1. Clean the A/C clutch field coil and pulley bearing mounting surfaces.
