Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
2. Install the A/C clutch field coil.
1. Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector properly positioned.
2. Place the Field Coil Replacer on the A/C clutch field coil.
3. Place the Coil Pressing Tool on the Field Coil Replacer.
4. Use the 2-Jaw Puller to install the A/C clutch field coil until bottomed completely against the A/C compressor.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
3. Install the A/C clutch pulley.
NOTE: The bearing is a tight fit on the A/C compressor head; it must be properly aligned to push on.
4. Install the pulley snap ring with the bevel side out.
5. Place one nominal thickness A/C clutch hub spacer inside the clutch hub spline opening.
