Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Evaporator Core: Service and Repair
REMOVAL
NOTE:
-
Replacement of the suction accumulator/drier is not required when repairing the air conditioning system except when there is physical evidence of
system contamination from a failed A/C compressor or damage to the suction accumulator/drier.
-
If an A/C evaporator core leak is suspected, the A/C evaporator core must be leak tested before it is removed from the vehicle.
1. Remove the suction accumulator/drier.
2. Remove the screws and reposition the A/C vacuum reservoir tank and bracket (if equipped).
3. Disconnect the connector from the speed control servo (if equipped).
4. Remove the bolt and reposition the speed control servo (if equipped).
5. Disconnect the condenser to evaporator tube from the A/C evaporator core.
