Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Drive Belt: Service and Repair
Removal
1. NOTE: Conditions requiring replacement of the drive belt are excessive cracking or wear, severe glazing or frayed cords. Replace drive belts
exhibiting any of these conditions. Minor cracks in the back of the drive belt are considered acceptable.
2. Remove the drive belt.
1
Rotate the drive belt tensioner.
2
Remove the drive belt.
Installation
1. Install the drive belt (2.5L engine).
2. Install the drive belt (3.0L engine).
3. Install the drive belt (4.0L engine).
