Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Canister Purge Solenoid: Service and Repair
REMOVAL
1. Remove the evaporative emission canister (EVAP canister).
2. Remove the canister vent solenoid.
INSTALLATION
1. To install, reverse the removal procedure.
2. Perform the Leak Test. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission Canister Assembly Leak
Test
3. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle.