Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Evaporative Canister Filter: Service and Repair
REMOVAL
1. Remove the evaporative emission canister (EVAP canister).
2. Disconnect canister vent solenoid hose assembly.
3. Remove evaporative emission system dust separator.
INSTALLATION
1. To install, reverse the removal procedure.
2. Perform the Leak Test. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission Canister Assembly Leak
Test
3. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle.
