Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
17. CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp and the screw.
1
Position the solenoid clamp on the main control valve body.
2
Install the screw.
18. CAUTION: The shift solenoid electrical terminals must face up on installation.
NOTE: The shift solenoids are interchangeable.
Install the SSA and the SSC shift solenoids.
19. Install the solenoid clamp and the screw.
1
Position the solenoid clamp on the main control valve body.
2
Install the screw.
