Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
24. Move the steering gear as far to the RH side of the vehicle as possible.
25. Move the LH front wheel spindle tie-rod forward to clear the frame crossmember.
26. Remove the steering gear from the vehicle.
Installation
1. Using the special tool, install new seals on the power steering return hose and power steering pressure hose.
2. NOTE: Make sure the steering gear input shaft is turned to the left until the stop is reached.
NOTE: Handle the steering gear with caution to avoid damage to fluid transfer tubes and to avoid dimples in tie-rod boots.
Turn the steering gear input shaft to the right until the stop is reached. Note the number of turns required.
