Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
12. NOTE: Replace the plastic seals on the power steering return line tube nut and on the power steering pressure line tube nut.
Install the steering gear fluid lines.
1
Install the power steering return hose and then tighten the tube nut.
2
Install the power steering pressure hose and tighten the tube nut.
13. Install the power steering fluid cooler.
1
Connect the power steering return line hose.
2
Connect the power steering return hose.
3
Position the power steering fluid cooler and install the nuts.
14. Install the front stabilizer bar.
-
Orientate the front stabilizer bar as noted during removal.
15. Install the LH tie-rod end on the front wheel spindle tie-rod.
-
Rotate the tie-rod end the number of turns recorded during removal.