Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Removal
1. Remove the wheel and tire assembly.
2. Remove the brake disc.
3. CAUTION: Do not attempt to remove the hub lock assembly by prying at the hub lock legs. This can result in cracked or broken hub
locks, which can cause vacuum leaks.
Install the Hub Removal Clips.
4. Install the Hub Puller.
1
Align the puller with three slots in the hub lock.
2
Tighten the set screw finger-tight.
5. Using the slide hammer remove the hub lock.
6. CAUTION: Whenever the hub lock is removed the O-ring must be installed new. Failure to do so may allow vacuum leaks causing loss of
four wheel drive operations and contamination of the hub lock vacuum system.
Remove and discard the wheel hub O-ring.
