Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
8. CAUTION: The TCC solenoid and converter modulator valve may pop out of its bore. This may damage the solenoid or converter
modulator valve.
CAUTION: Shift solenoids may pop out of their bore. This may damage the solenoids.
Remove the EPC and SSB solenoids.
1
Remove the solenoid clamp screws.
2
Remove the solenoid clamp.
3
Remove the EPC and SSB solenoids.
9. CAUTION: Do not pry on the other wires or damage the connector case surface.
Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector from the transmission case (16 pin) electrical connector.
1
Disconnect the TSS sensor electrical connector.
2
Remove from the TSS sensor wire locator.
10. CAUTION: Do not overstretch the retaining spring.
Remove the transmission case (16 pin) electrical connector retaining spring.