Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
11. Install the transmission fluid pan.
1
Position a new transmission fluid pan gasket on the transmission fluid pan.
2
Align and install the transmission fluid pan.
^
Loosely install the screws.
12. Tighten the screws.
13. Connect vehicle harness to transmission (16 pin) connector. Make sure lock is fully engaged.
14. Lower the vehicle.
15. Connect the battery ground cable.
16. Fill the transmission to the proper fluid level and check for proper transmission operation.
^
Use MERCON V Automatic Transmission Fluid XT-5-QM meeting Ford specification MERCON V.
