Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Band Apply Servo: Service and Repair
Intermediate Servo
Special Tools
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the shift cable.
1
Disconnect the shift cable from the manual control lever.
2
Remove the shift cable from the bracket.
4. Remove the digital Transmission Range (TR) sensor.
5. Remove the Three-Way Catalytic Converter (TWC).
6. Remove the main control valve body.
7. Remove the intermediate band locknut and unscrew the screw. Discard the intermediate band locknut after removal.