Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
2. CAUTION: Do not damage O-ring during installation. Do not press servo cover, and O-ring past relief hole in case, or O-ring damage
may occur.
Install the intermediate band servo piston assembly into the transmission case.
^
Lubricate intermediate band servo cover O-ring with petroleum jelly.
3. Using Servo Cover Compressor, install the intermediate band servo cover retaining ring.
1
Install the Servo Cover Compressor and compress the intermediate band servo cover.
2
Install the intermediate servo cover retaining ring.
4. Adjust the intermediate band.
5. Install the main control valve body.
6. Install the digital Transmission Range (TR) sensor.
7. Install the shift cable.
1
Install the shift cable.
2
Install the shift cable to the manual control lever.
8. Install the three-way catalytic converter.
9. Lower the vehicle.
10. Connect the battery ground cable.
11. Fill the transmission to the proper fluid level and check for proper transmission operation.
^
Use MERCON V Automatic Transmission Fluid XT-5-QM meeting Ford specification MERCON V.
