Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
6. Clean and inspect the transmission fluid pan and magnet. Clean all mating surfaces.
7. Flush the transmission fluid cooler and transmission fluid cooler lines.
Installation
1. CAUTION: Lubricate fluid filter O-rings with MERCON V Automatic Transmission Fluid XT-5-QM meeting Ford specification
MERCON V or they may be damaged.
Lube and install new O-rings onto the transmission fluid filter. Install a new transmission fluid filter.
^
Position transmission fluid filter on the main control valve body.
2. CAUTION: Make sure wire harness is not pinched under filter.
Install the screw.
3. Position the oil pan magnet in the transmission fluid pan.