Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
2. NOTE: Make sure main control to case gasket is properly aligned.
Install new main control to case gasket.
3. Position the main control valve body with the two valve body guide pins as a guide.
4. NOTE: The main control valve body screws will be tightened in later steps.
Loosely install four M6 x 45 mm screws.
5. NOTE: The main control valve body screws will be tightened in later steps.
Loosely install two M6 x 35 mm screws.
6. Remove the Valve Body Guide Pins.
