Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
2. Install clutch master cylinder tube.
1
Position line and install roll pin.
2
Tug on clutch master cylinder tube.
3. Raise and support the vehicle.
4. Bleed the system.
5. NOTE: Check that the O-ring is in place on the line. Check the clutch slave cylinder port to be sure there is no O-ring.
Insert the male coupling end into the female coupling of the clutch slave cylinder.
^
Check that the connection is secure by applying a slight tug to the line.
6. Connect the line to the plastic clip on the floor flange.
7. Lower the vehicle.
