Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
Universal Joint: Service and Repair
Universal Joint Flange - Front
Special Tools
Removal
CAUTION: This operation disturbs the differential pinion bearing preload. This preload must be carefully reset when assembling.
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result
in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
Raise and support the vehicle.
2. Index mark the front driveshaft to the pinion flange.
3. NOTE: Do not allow the driveshaft to hang unsupported.
Disconnect the front driveshaft.
1
Remove the four bolts and remove the universal joint spider retainers.
2
Disconnect the front driveshaft.
3
Position the front driveshaft aside.
