Ranger 4WD V6-3.0L VIN V Flex Fuel (1999)
8. Lubricate the three CV joint needle bearings.
^
Use Ford High Temp Constant Velocity Joint Grease E43Z-19590-A or equivalent meeting Ford specification ESP-M1C207-A.
9. Fill the inboard CV joint housing with 235 grams of grease.
^
Use Ford High Temp Constant Velocity Joint Grease E43Z-19590-A or equivalent meeting Ford specification ESP-M1C207-A.
10. Position the CV joint housing onto the CV joint.
11. NOTE: Remove any excess grease from the inboard halfshaft boot mating surface before positioning into place.
Position the inboard halfshaft boot and boot clamp.
1
Position the inboard halfshaft boot into place.
2
Position the boot clamp.