Ranger 4WD V6-40L Antenna Cable Replacement
Antenna Cable: Service and Repair
Antenna Cable
Antenna Cable
Removal and Installation
1. Remove the antenna. For additional information, refer to Antenna See: Service and Repair/Antenna.
2. Remove the audio unit. For additional information, refer to Audio Unit See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and
Repair/Removal and Replacement/Audio Unit.
3. Release the tabs and lower the glove compartment door to the full-open position.
4. Remove the antenna cable.
1. Pull the rubber grommet from the sheet metal.
2. Remove the antenna cable through the glove compartment door opening.
5. To install, reverse the removal procedure.