Ranger 4WD V6-4.0L (2009)
Antenna Cable: Service and Repair
Antenna Cable - Satellite Radio
Antenna Cable - Satellite Radio
Removal and Installation
1. Remove the satellite radio antenna. For additional information, refer to Antenna - Satellite Radio See: Service and Repair/Antenna - Satellite
Radio.
2. Press the tabs and lower the glove compartment completely.
3. Disconnect the satellite radio antenna cable-to-satellite radio receiver electrical connector.
4. NOTE: For ease of installation, the new satellite radio antenna should be tied to the existing cable and pulled through the side of the instrument
panel.
Remove the satellite radio antenna cable.
5. To install, reverse the removal procedure.