Ranger 4WD V6-4.0L (2009)
Power Mirror Switch: Service and Repair
Exterior Mirror Control Switch
Removal and Installation
1. Remove the 2 interior door handle trim panel screws.
2. Remove the interior door handle trim panel.
-
Lift the interior door handle trim panel upward to release the interior door handle trim panel retaining clips.
3. Remove the exterior mirror control switch.
-
Disconnect the electrical connector.
-
Press the 2 exterior mirror control switch retaining tabs.
-
Remove the exterior mirror control switch from the interior door handle trim panel.
4. To install, reverse the removal procedure.
